How Safe Are Wireless Home Security Systems?

Are wireless home security systems safe? Info from the Brickhouse Security say “Wireless Home Security Systems are fully wireless and have built-in power supplies; even if the phone, power and Internet connections are down, your Wireless Home Security System will continue to monitor and protect your property. This feature will come in handy if an intruder cuts the power and phone lines, or there is a blackout and burglars are on the prowl.” Does this mean that the system has its own cell-phone built-in or uses a satellite so it could notify the PD and if so doesn’t a burglar need nothing but a signal disrupter? No I’m not a burglar, just curious in how it works and how safe it really is. We all know if you have an alarm set to the phone-line someone can cut the lines, if you have digital phone someone can just turn the power off your house, or do both. So can a disrupter knock out the system signals? The real question is, “How safe are any Home Security Systems?”

Be Sociable, Share!

Tags: , , , ,

This entry was posted on Tuesday, February 2nd, 2010 at 5:28 pm and is filed under Security systems. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

3 Responses to “How Safe Are Wireless Home Security Systems?”

  1. empecok Says:

    it really2 safe and reliable as the technologies created to secure a home,office or building..these are some of explanation of why you should have no worries about Wireless Home Security Systems

    It used to be that the most effective home protection required installing a labor-intensive, hardwired security system. Those days are history thanks to the SecureLinc, a full-featured, customizable security system that connects in a fraction of the time of hardwired systems. No complicated wiring or cabling is required! Just plug the main unit in, mount the wireless sensors in the zones you want to protect (within 600 feet), and you’re ready to program the system!

    When it detects an alarm signal from one of the wireless sensors, the system blasts an 85dB siren that not only alerts your family, but also sends would-be thieves fleeing. In addition, you can program it to call any phone number (i.e., a friend or neighbor, your office, your wireless phone, etc.) and play a pre-recorded message in your own voice. It doesn’t even need its own dedicated phone line!

    This security system supports optional 24-hour monitoring by commercial alarm companies, which can dispatch police, fire, medical response, etc. (depending on the type of alarm signal it receives). SecureLinc can even call you for non-alarm events. For example, the system can call you when your child comes home from school and successfully disarms the alarm.

    This system combines a control panel, keypad, graphic LCD screen w/clock, 85dB siren, speaker and microphone in one elegant console. It supports up to 8 individual user codes, so each user can have an independent code ID. It also doubles as a message center, so you can hear and leave messages up to 20 seconds.

    For maximum convenience, SecureLinc can operate 7 X10-controlled lights or appliances (or 7 groups of lights or appliances). For example, its X10 timer function can be used to make your home look occupied when you’re away on vacation. Or you can have it turn the X10-controlled porch light on for 4 minutes when you arm or disarm the system – that way you never have to enter or leave your house in the dark. Note: To access these features, you’ll need the X10 Cable & Interface, provided separately.

    The SecureLinc comes with a 4-Button Keyfob Remote: Arm and disarm your system with this tiny keychain remote. An auxiliary button can be programmed to control lights or appliances. The system supports up to eight keyfob remotes (additional remotes sold separately).

    The SecureLinc also includes two Magnetic Door/Window Contacts: Protect doors, windows, gun cases, jewelry boxes, or just about anything that opens and closes. Additional Magnetic Door/Window Contacts are sold separately; attach one on every entrance!

    The SecureLinc System is expandable with multiple accessories, including Pet-Immune Wireless Motion Sensors and Wireless Glassbreak Sensors. All accessories are provided separately

  2. daddyspanksalot Says:

    I have ADT and I can asure you that nothing is safer. ADT is the ONLY security system which is approaved to secure government military and office buildings. It has six redundent stations monitoring your house at all times. My system is nearly unbeatable. Their are only two ways to beat the system: 1) miltary frequency jaming to jam the outgoing signal. 2) know the only unmonitored way in the house — hint : Mini Me will have problems fitting through this one. I personally recomend the ADT WIRELESS HOME SECURITY SYSTEM. I am a quality control manager and do not work in the security industry and have no ties to any security company other than the fact that I am a customer of ADT.
    P.S. If the power goes out at my house their is a three day battery back up to the system. it is very secure and only about $45/month.

  3. Says:

    Wireless security systems are highly inferior when compared to their Hardwire counterparts. The sad fact is, the only reason alarm companies install wireless is because it is easier and monitored alarm systems are a numbers game… the faster you get them in the more money you end up making. Truthfully, it is a dis-service to the end user.

    As far as the supervision of phone lines, there are cellular solutions available, typically these will relay your alarm signal to a clearing station which will then route the signal to your monitoring station. I have a number of accounts in this technology and it works great.

    Crooks tend to cut the phone lines then wait to see if there is any response. If nobody shows, they break in, kill the alarm panel (Which is much easier on a wireless toilet alarm) and have their way.

    I have written an article on wireless security and it can be viewed in the archive at or below. It may seem biased to some, however I have been in the industry for 20 some-odd years and know the truth first hand. This is how I see it.

    Wireless Vs Hardwire

    This is an ever-growing debate within the security alarm industry; both sides have their opinions as I have mine. Since starting KeepSafe Systems, I have never installed a wireless security system. There are several reasons starting from appearance, reliability and sustainability to never having the need to and always finding a way to get a wire where it is needed.

    Appearance is a large concern of many homeowners. Although transmitters have gotten smaller over the years, wireless security systems involve the installation of boxy transmitters around your doors and windows. Wireless security system supporters will often tell horror stories of holes drilled throughout your home or wires stapled all over your walls. Yes, I have seen these types of installations, for the most part, they are done by inexperienced or lazy technicians who prefer wireless security systems. Although some wire runs can be difficult and very occasionally require surface runs, there is no excuse for sloppy workmanship. Pick your security alarm installer very carefully; often the small business owner will take more care in ensuring the quality of the installation.

    When it comes to the reliability of security systems, hardwire will always be the more reliable of the two. Wireless security alarm supporters of course will say “modern wireless security systems are supervised”, basically this is passing over the pitfalls of the technology and adding a feature to tell you when the technology fails. This inevitably runs into expensive and time wasting service calls, equipment replacement and potential false alarms. One need only look at the cordless phone to see the pitfalls of the wireless technology. Sure they are great when you first purchase them, however, age and interference take their toll and sooner or later you have a paperweight with buttons and an LCD screen.

    Sustainability is potentially the most expensive reason for choosing hardwire security systems over wireless. I can’t even begin to count the changes in wireless security technology and frequencies used since getting into the business back in the late 80’s early 90’s. Even the wireless security system supporters will tell you that technology is always changing (Except they use the word “advancing”… it sounds better in advertising). So how do wireless security system “advancements” affect the owner of a wireless security system? Easy, say for example you were the unfortunate victim of a wireless security system sales person in 1995. Chances are if one of your motion detectors fails you will be hard-pressed to find a replacement. Simply put, you will now have to purchase an entirely new security system (Control panel, detectors, keypad etc) which depending on the size of your security alarm system will cost you as much and possibly more than if you would have installed a hardwired system to begin with. So in all fairness, I feel I should tell you what is in store for you if a hardwired detector fails. Simple, you replace the detector. Hardwire detectors are simple switches and most hardwire security system detectors are interchangeable regardless of the manufacturer.

    Another factor within the realm of sustainability is the cost of upgrading. Back to the system installed in 1995. Yes there have been significant changes in security alarm technology since then. In the hardwire security system world, these changes are mostly in the area of convenience, esthetics and features. If all your detectors are in working order, upgrading a hardwire security system simply involves changing the control panel and keypad(s). This is generally a fairly easy process and is substantially less expensive than upgrading a complete wireless system.

    One last consideration in choosing hardwire security systems over their wireless counterpart is the selection of detectors. Although you can retrofit almost any hardwire detector to a wireless system, there are far more choices of detector types in hardwire. Take for example Carbon monoxide, water, natural gas, propane, vibration… and the list goes on. Wireless security systems are generally designed around the average security need of the consumer. Since detectors are not interchangeable across manufacturer lines, it would be financially unfeasible for a wireless security system manufacturer to create wireless detectors for every conceivable need. Even in the spectrum of standard detectors, there are some manufacturers who have extremely reliable detectors that only work on hardwire systems. Choosing a wireless security system can often result in you having a detector less suited for your particular application. Once again the average security need factor comes into play.

    Inevitably, the choice of whether to have a wireless or hardwire security system installed is entirely up to you. In fact, your only choice may be wireless. Hopefully I have given you some information to help you along with your decision.


About - Contact - Privacy Policy - Terms of Service